Tilted Box Dimensions

Compute dimentions of a box that is tilted. Fill in three of the a, L, T, h parameters. Then you can compute the one unknown. Width is always computed so don't fill in that. If you know width but not height, re-orientate your setup so that height and width are swapped. It does not matter if the box is tilted left or right, the results are the same. Note that for large heights and thick boxes, there might be two solutions for the angle as the width is not used in the calculation. Only one angle is reported by this tool.

Angle, a=	degrees
Length, L=	m
Thickness, T=	m
Height, h=	m
Width, w=	m